Monday, September 24, 2012
Jaguar X 308 Bluetooth phone Setup Guide
Jaguar manuals for Bluetooth phone Setup Guide Jaguar X 308 .
Bluetooth phone setup instructions:
Basic stereo system connection factory in 1998 by 2002 XJ easy adapter for aftermarket website now handsfree Bluetooth. Remaining years and models are similar. Several have been successfully installed to take full advantage of Mute when calling the factory stereo line input to and output audio and mic factory. All required cabling there is in the centre console. Take a look at the schematic RT2 connector (connector 2-row white 10-pin). Pinout is as follows: RT2-1 = Purple/Red Audio from your phone to a stereo line level negative RT2-2 = Purple/Pink Audio from your phone to a stereo line level 3 positive RT2 = medium Purple/Orange radio and will switch the telephone audio music through the speakers. Most car sets fitted with wire to ground to mute so you can plug directly into the digestive tract. RT2-4 = yellow Factory mic positive lead RT2-5 = Braid Factory mic negative lead RT2-6 = Black ground RT2-7 = blue/yellow ACP networks of positive. RT2-8 = positive Brown/purple always powered battery fuse # 5 (5A) in fusebox RH heelboard. RT2-9 = ACP green/yellow light net negative. Note: a network of ACP is used for the functions of the radio button for the phone. RT2-10 = power White/Green Key switched fed fuse # 10 (5A) in the fuse RH heelboard. If you look on the face of the 10-pin connector, pin # 1 is in the left upper part and pin # 10 is in the lower right corner. The pins are numbered from left to right and top to bottom.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.