Monday, September 24, 2012
2007-2008 Ford Focus bumper Cover speed grille inserts installation manual
Ford manuals for 2007–2008 Ford Focus bumper grille inserts manual Cover speed installation.
Bumper Cover speed grille inserts installation instructions:
1. raise the front of the vehicle to gain access to the back bumper of holes. 2. remove the apron ABS, thereby removing all fasteners securing to cover the bumper and the underside of the vehicle. You can find the "pushing" hex headed fasteners and screws. 3. Insert the Center grille opening the top speed for the Centre Party is fixed to the black plastic grid using two terminals on the cable. Insert the Cable tie loops gratings speed, and then through the X Member in a grid with plastic. Install the cable ties approximately 1 "from each end. Corner of the grille will speed fixed with two metal clips provided. Install the clips from "humped" side up. The clip will move through the grid x and on the grill. Clip as close as possible to each objective as possible. 4 speed side Grilles are installed in the same way. With the exception of air caused by side fairings grid failed to install cabling and terminals at the outer ends of steel clips. They will have to be installed to the apporximatley fixed 5 "from the extremities. 5. Pull all the terminals of the cables snug and cut off the excess. 6. reinstall the ABS apron removed in step 2.
Download
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.