Guide Handbook Manual

index» Dodge » 1995-1999 Dodge Avenger adjustable Coilover Kit installation manual

---

1995-1999 Dodge Avenger adjustable Coilover Kit installation manual

Dodge manuals for 1995-1999 Dodge Avenger adjustable Coilover Kit installation manual.
Adjustable Coilover Kit installation instructions:
Note: • it is recommended, install this product set coilover technique/professionally. • Instructions for removing the slide the rozpórke factory and diagrams, see the service manual or your factory equivalent.
Spring height adjustment: this set coilover is designed to allow both race ride and ride up the street. It is not recommended to run the race-height for normal driving the street. This will cause more wear on the tyres due to excessive negative creates more stress the bilge in the wheel hubs and ball joints. In the vehicle, jacked up and protected based on Jack, (or counter clockwise) to raise or lower (counter clockwise) perches aluminium with wrenches manual key delivered to the desired height. Depending on how integrated securely tighten other Perch against him. Lower the vehicle to verify the amount. This process can be repeated until the desired height is achieved. Tilt and toe settings will change depending on the height adjustment. Wheel alignment, it is recommended that after you complete the installation. On the chassis dopompowanie these installations on brand Thong activities can be found in the following diagrams of the General Assembly, in order to install a set of adjustable coilover Skunk2 Racing shocks and Struts brand Thong. • Do not install, 10.5 mm ID or 14 mm ID mouse pads. • Before installing the "L"-shaped ring (ID larger) front, you must install the steel ring is provided by horses. • To install the "L"-shaped ring (with ID less) back, a clearance hole with a grinder die. • It may be necessary to settle the upper aluminum installs accommodate larger diameter piston rod.
Download