Monday, September 24, 2012
2007 Chevrolet Suburban/Avalanche exhaust system setup guide
Chevrolet/Chevy manuals for 2007 Chevrolet Suburban/Avalanche exhaust system setup guide.
Exhaust system installation/removal instructions:
Note removing the exhaust system: with a used vehicle, we suggest penetrating lubricant spray liberally applied to all exhaust fasteners, and allowing for a significant period of time for the chemical to lubricate the threads before attempting to disassemble. 1. Remove without, in accordance with the recommendations of the manual of the vehicle. 2. remove the cieplochronnej shown in Figure 1. Place and equipment for later use. 3. using a saw or a hack of a turning saw, cut the exhaust 3 inches for the last Hanger, as shown in Figure 2. 4. Lubricate all hangers and rubber insulators. 5. using a tripod or additional persons possessing the silencer mounting of the silencer rear position, remove the hooks of insulators in the rubber and the removal of a vehicle for mounting the rear silencer, as shown in Figure 3. 6. Unbolt the collar as shown in Figure 4. Place the equipment on the side for use during the installation of the new system, the exhaust system. 7. using a tripod of the silencer or additional person for the position of the front mounting of the silencer, remove the hanger services with Isolator rubber and delete the other gases in Figure 5 with the vehicle.
Download
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.