Guide Handbook Manual

index» Ford » 2005 Ford Mustang fog Roush wiring harness installation guide

---

2005 Ford Mustang fog Roush wiring harness installation guide

Ford manuals for 2005 Ford Mustang Roush przeciwmgielny wiring harness installation guide.
Fog lamp wiring harness installation instructions:
1. open the hood of the vehicle and remove black plastic Panel at the top of the radiator. 2. lay out Roush in the engine compartment, in accordance with the diagram below. 4. on the new harness, plug the Roush C2 and C4 Ford fog lights wiring. 5. Roush connector C1 and C3 to Ford fog lamps. 6. Roush C5 and C6 connectors to Roush fog lamps. 7. connect the ground on using existing wiring Roush bolt carrier core substrate Ford on the radiator. 8. using the screws (2) provided, attach the module pass Roush Tower push the rozpórke the driver's side. 9. Zip wires, cables, and Roush Ford hood release cable next to the Tower push rozpórke. 10. reinstall the black slab of plastic at the top of the radiator.
Fog light switch with Roush installation: 1. remove the front side and a liner of the front wheel the driver. 2. Route cables from the engine to the Roush grommet in a front wheel. 3. using cutters to cut the side of the nipple in the spare end grommet. Inserting single line L9 handsets through a hole in the nipple and insert the ½ "to convolute to the nipple. Place the zip tie around the nipple for pipe Roush on the spot. To harness the major postal bind Ford Roush harness. 4. reinstall the front side of the wheel well of linear and front wheel driver. 5. remove the installation of headlamp beam switch and disconnect the grey connector to Ford.
Download