Guide Handbook Manual

index» Honda » The Summary window module setup guide 2004 Honda Accord Coupe

---

The Summary window module setup guide 2004 Honda Accord Coupe

Honda manuals for 2004 Honda Accord Coupe Summary window module installation manual.
The Summary window module installation instructions:
1. Remove the driver side door panel (04 instructions Coupe) a., delete the take off the lid and 2 screws from the inside of the door handle of the Cup (b) remove the two bolts below the armrest c. Remove trim piece on the side of the mirror in the upper right corner of the door panel by pulling on it, died. gently remove the door panel by first pulling on it at the bottom and then fly over the window on the top lip e. unplug all cables and harnesses mechanical cables door panel door panel and place it in a safe place, f. Remove the speaker by inserting a screwdriver slot head flat on top and gently pulling on it. From the top, gently pull up on the loudspeaker, tap water released into free tabs bottom note: If you break one or two off the loudspeaker can easily be determined with the aid of a brief self tapping screws to secure the speaker to g. will find doors Behind the speaker wires, wire, primary for the door. It is recommended that the modules window to be securely attached to the wire ties or similar method. h. Green route cables in the module window for the wiring that plugs into the power window switches. Ideally this can be achieved by wire routing inside the door. If not possible, another option is to route cables from one of the holes, which clips the door panel, insert into, so long as the delete and reject the clip that goes into the hole. and all other tubes junction inside the door will, with the speaker.
Download