Wednesday, October 24, 2012
Manual installation of G3 2008-2010 Dodge Avenger VSM
Dodge manuals for installation manual VSM G3 2008-2010 Dodge Avenger .
VSM G3 installation instructions:
Step 1. Place the DTT between console and frame moving chromium and is gently twist until the 4 clips you have in place. After the release of this frame, annul the contested and removed the front compartment cubby shifer. It is held in place with two (2) clips. Then the frame surrounding the meeting of the entire shift, cubby hole and the immediate area to the right and left control climate change must be removed. Remove this frame by placing the first DTT between the frame and the right control molding line of climate change. Gently work Open clips of four (4) holding the frame in the workplace right rotation clock utility to control climate change down around move and back up on the left side of the control of climate change. Carefully set aside this piece. STEP 2. Then remove the frame surrounding the radio. In the upper right corner of the frame right vent, include DTT. By gently turning motion clips for the release of eight (8) holding the frame in place, radio clockwise rotation. When you release the clips, unplug the wires to the frame of radio and carefully set aside. STEP 3. Remove the four screws (4) of torque, surrounding the radio of a torque T20. Delete radio, do not unplug the wires, protective wrap cloth around it and simply allow the radio to set aside.
Download
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.