Guide Handbook Manual

index» Cadillac » 2003-2006 Cadillac CTS Kit installation manual automatically disabling Traction Control System

---

2003-2006 Cadillac CTS Kit installation manual automatically disabling Traction Control System

Cadillac manuals for 2003- 2006 Cadillac CTS automatic turning off traction control Kit installation guide.
Automatic turning off traction control Kit installation instructions for the system:
1. access to deck rear shelf where electronics rear body are located. Identify the module integration rear (RIM), as indicated in Figure 1. 2. references to figure 2 in connectors attached to the BCM, identify the following cables: Brown w/White stripe for 1 Connector (C1), Pin 1 connector on the A2 Pink (C1), Pin, A4 Black/White Connector 1 (C1), 3 Pin, A8. Using pliers, wire tap install, comes with a set to each of these three wires. 4. lamp volt meter or test to check whether the Pink slice to black with White stripe splice has 12 v, only when the ignition is turned on. 5. plug the connector wire Auto TCS Black wire to tap on a Black-White stripe. 6. connect the connector wire Auto TCS White wire to the tap at Brown-White stripe. 7. connect the Auto TCS Pink connector wire tap pink wire cables. 8. Secure module auto TCS with zip tie. 9. you must reinstall any under the rear panels removed. 10. This will complete the installation.
Download