Wednesday, October 24, 2012
Installation manual Hatchback 2000-2001 Hyundai Accent
Hyundai manuals for 2000-2001 hyundai Accent installation manual Hatchback.
Hatchback: installation instructions
1. the Lower exhaust for ease of installation. 2. delete the cieplochronnej and cut out the corner closest to the hole that gets magnified, and then plug the heat shield. 3. raise the hitch to position and place 1/2 "carriage bolts to the safety chain plate above the vehicle tow loop and fasten your finger tight flanged 1/2" and spacer CM-SP34 as shown. 4. fasten the two bolts M12 with 1/2 "connical tooth mouse pads from existing weldnuts in the driver-side frame rail finger tight as shown. 5. Make a hole in the passenger side frame rail to fit 1/2 "bolts. 6. Fishwire 1/2 "carriage bolt with spacer CM-SP40 by rail passengers on the side of the frame from the edge of the bumper, the enlarged hole. Fasten your finger tight flanged 1/2 ". 7. the value of the moment, all the equipment 1/2 "to 75 ft-lb, and all of the M12 equipment to 65 ft-lb 8. Reattach the exhaust to the location of the hanger services removed in step 1.
Download
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.