Monday, September 24, 2012

index» » 2005 Ford Focus 2.0 l nitrous Kit installation manual

2005 Ford Focus 2.0 l nitrous Kit installation manual



Ford manuals for 2005 Ford focus 2.0 l nitrous Kit installation guide.
Nitrous Kit installation instructions:
1. by using standard removal tool can remove the stereo Ford, stereo. 2. unscrew the hexagon a/c controls, purchase ashtray, unplug the power loom and set aside the trim tile. Note When you extend each pipe. 3. measure 1 5/16 "down from the top of the trim audio unit and 1 1/8" in the driver's side as trim. Drill a hole 3/4 diameter switch, nitrous. 4. Cut square groove 1/16 "long on each side, on the left side of the hole. 5. install the Interior of the nitrous arming plunger to switch to the hole drilled in step 3. 6. connect the switch to the tip of the spade wiring to the back of the switch, the arming plunger: black wire to the top of the Brown terminal switch, red and blue wire from the middle and Red wire terminal on the lower terminal. 7. switch Route to harness the bulkhead by a dash down the back side of the driver's side of the fender well. 8. connect the wiring harnesses, reconnect the a/c controls, stereo and sound crop and replace the unit. 9. with the front of the car SAFELY on Jack stands, remove the front wheel on the driver's side. 10. Remove black bulkhead pipe molding from the location of the driver side fender well drill a hole in the corner ½ "outboard of the deleted region with plastic (molding).
Download


No comments:

Post a Comment

Note: Only a member of this blog may post a comment.