Monday, September 24, 2012

index» » 2008-2010 Honda Accord cutting Fine mesh installation manual

2008-2010 Honda Accord cutting Fine mesh installation manual



Honda manuals for 2008-2010 Honda Accord Coupe fine mesh Grill installation manual.
Fine mesh Grill installation instructions:
1. Remove the front compartment, if provided with the tag by removing the screws at the top of the front bracket factory marker (if installed), and two screws hex 10 mm. Remove the cover from the factory bumper clips (not again). 2. open the hood and pull up on the plastic push fasteners centres to release them. Remove the push pins and remove the cover of the radiator. 3. application of several layers of tape mask bumper cover surrounding grille factory to protect the smooth Finish. Tuck the tape as soon as possible for as many surround grille factory 4. Remove the four (4) push switches from the entire plant on the top and bottom of the grille factory (see extension identification pin push). Pull the front bumper to access push pins (including eight pins). 5. Push the grille, side mounting tabs, and then pull the grille with bumper guards. 6. measurement and mark the center of the grille opening factories. 7. Cut a hole the supplied template location and Align front bumper, making sure that the template fits into the recess and the line from the stretch marked in step 6. Strip plate tem in order to prevent it from shifting the location. Determination of the location hole on the front cover of the bumper on the driver's side, you use similar tools pointed or awl. Untape template and Reverse the determination of the location hole on the side of the passenger.
Download


No comments:

Post a Comment

Note: Only a member of this blog may post a comment.